What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
08.06.2025 01:36

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
A fuse is a non-resetable over current circuit protector.
One
2024–10–16 [ OO OLAOYE OYEBODE ]
How Cocaine Hijacks the Brain - Neuroscience News
the problem then depends on "how fast does the fuse operate?".
At one ohm, the resistor has a maximum of 1 watt power.
Here is a simplified AC power diagram.
It seems Mohan does not understand the difference between a comment and an Answer.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
Steelers sign Aaron Rodgers, pending a physical - NBC Sports
but this device (an Inductor) … impedes the rapid changes in the current.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
(Dc diagram shown, AC is similar).
Some in Steelers Building Wanted to Go Back to Justin Fields in 2024 - Sports Illustrated
He then describes Rainy Season and Lightning.
Edit 2024–10.
In schematic diagrams this is the symbol for a fuse:
Harvard scientists issue 'toxic' warning over 'hidden dangers' of protein powders - LADbible
This is 'the assistant's answer'
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
But… the neutral is now “floating” because of the 1 ohm resistance.
Which feels physically better for guys: vaginal sex or anal sex?
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
Now when you have a certain ac resistance, then a current flows in a loop.
What does a fuse do?
Latest AirPods Pro 2 feature is ahead of its time in the best way - 9to5Mac
An AC voltage/ current source, and an ac inductive load.
A circuit breaker is similar, but is resettable.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Vinicius Jr. and Brazil Draw Blank in Ancelotti’s Debut - Managing Madrid
He then asserts :
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
[old diagram got deleted by accident]
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
[image of Common-mode choke]
So, the voltage could go up to 500 volts, and the fuse will not open up.
What are 5 ways that can be done by the community to improve the public transport system?
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
2024–10–10[John johnson John Johnson ]
Upvotes:
But it can get overloaded, and no longer works.
eight
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
These are simplified answers to the original question, and does not change anything I wrote above.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
but I think this circuit , shows a few more pieces.
This is where the MOV conducts again, and dissipated the energy.
What is lightning?
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
2024–10–14 [Omar Gharbi Omar Gharbi ]
The third is lightning and “how it gets conducted into a home.”
Can the fuse protect the electronic devices from lightning instead of a surge protector.
The other is “what does a “fuse” do?”
He then describes the function of a fuse.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
At least they know the answer if they wanted it.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
what exactly is a ‘surge’ protector?
The bolt then partially travels down the line to your home.
For this case there are devices called Metal oxide varistors (MOV).
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
Because the load is inductive, the current lags the voltage.(by a bit).
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
These devices are installed between the “hot” and “neutral” and protective ground.
a photo is worth a thousand words.
I post the exact comment here.
There are two important concepts here.
Barnstars:
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
This device then solves the entire problem.
so, what happens?
It also is a device that limits the change in current flow.
This one hit behind the barn.
The MOV will conduct when the voltage exceeds 50% of line voltage.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
First Sentence:
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
This is where this question deviates from being a 'generic' question, and becomes more specific.
There are three different concepts here that are getting confused.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
nine
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
One is “what exactly is in a ‘surge protector’ ? ”
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.